beams can be a bit challenging if you are not used to working in all dimensions or if you’re worried about cutting in the wrong place. Fortunately, hollow beams are extremely easy to overlap with a few simple tools.

When to Overlap Beams

Interior designers and contractors alike are getting more creative with their ceiling beam designs these days, often creating patterns that involve boxes and grids at differing heights. These designs offer a complex, elegant look, but it also takes some planning ahead to get them right. If your pattern involves beams that cross, you will need to have a plan to either overlap them or cut them to fit the intended space.

Use Eye Bolts and Safety Cable 

If you don’t think you can notch your beams out accurately enough to fit together, the next best  solution involves using eyebolts and safety cables to achieve the grid look you’re going for. Using a hole saw, you can create a small hole in the beam closest to the ceiling wherever there is a block of wood supporting it. Then you can install an eye bolt in that support and loop a strand of safety cable through the bolt. Next, secure your second hollow beam to a block of wood in the space and install another eyebolt facing upward. When you lift the beam into place, all you have to do is loop the safety cable from above through the lower beam’s eye bolt and clamp it down. Now the beam is suspended tightly against the upper beam. When it comes to creating complex layered grid patterns on a ceiling, hollow beams are significantly easier to work with than real wood. They are lighter weight and they offer more flexibility with the placement of eye bolts for securing additional layers as you go. For more information about hollow beams, contact Volterra Architectural Products on our website or call us at 602-258-7373.